2012-02-27

MAME Plus! v0.145u3 r4988

EmuCR: MAME Plus!
MAME Plus! v0.145u3 r4988 is compiled. New version of this MAME Emulator for Windows. MAME Plus! has many features to make it a great unoffical build.

Mame4droid Reloaded v1.0

EmuCR: MAME4droidMame4droid Reloaded v1.0 is released. MAME4droid Reloaded emulates arcade games supported by original MAME 0.134u4. This MAME4droid version is targeted to Dual-Core devices (1GHz and 512MB RAM minimum), because it is based on a high specs 2009 PC MAME build. Anyway don't expect arcade games of the 90 to work at full speed. With some games that are really bad optimized (like outrun or mk series) you will need at least a 1.5 ghz dual-core device. This is related to MAME build used, since it is targeted to high specs PC's as i said before. This version doesn't have an uml back end ARM dynamic recompiler, which means drivers based on high specs arcade CPUs won't be playable (it has not sense since this games will be slow in any case).

Dolphin wii-network Git 3.0-428

EmuCR:DolphinDolphin wii-network Git 3.0-428 is compiled. Dolphin wii-network is a branch of Dolphin. Dolphin is the first Gamecube emulator able to run commercial games! Dolphin is a great Gamecube(NGC) and Wii emulator. It has a partial Wii support and plays most Gamecube games. Dolphin has been changed SVN to Git recently.

iNES v3.6.15 for Android

EmuCR: iNESiNES v3.6.15 for Android is released. iNES emulates classic NES and Famicom video game consoles. It runs NES, Famicom, DiskSystem, and VS System games right on your Android device.

MasterGear v2.6.15 for Android

EmuCR: MasterGearMasterGear v2.6.15 for Android is released. MasterGear is a program that emulates 8bit SEGA videogames on your computer. It runs games made for SEGA MasterSystem (Mark3 in Japan) and GameGear, as well as their predecessors: SG1000, SC3000, SF7000, and Mark2. MasterGear will also help hobbyists who still write software for these systems to debug their works without using rare and costly development hardware.

PCSX Reloaded SVN r75519

EmuCR: PCSX ReloadedPCSX Reloaded SVN r75519 is compiled. PCSX-Reloaded is a fork of the PCSX-df Project, a PlayStation Emulator, with support for both Windows and GNU/Linux operating systems as well as several bugfixes/improvements.

Altirra 2.1 Test 14

EmuCR:AltirraAltirra 2.1 Test 14 is released. Altirra is an Atari 8 bit Emulator on the Windows/DOS platform. Altirra emulates several models of the 8-bit Atari computers. This includes the the 800, 800XL, and 130XE versions. It has a lot of options, and compatibility is decent especially given the emulator's early stages. It also supports some copy protected games properly in emulation.

mmSAP v3.2.3

EmuCR: mmSAPmmSAP v3.2.3 is released. mmSAP is SAP (Slight atari player) player based on ASAP library that uses ALSA for audio output and has GTK+ 3.0 based GUI. SAP is a special file format that is used to store POKEY-based Atari XL/XE music.

Stella SVN r2398

EmuCR: StellaStella SVN r2398 is compiled. Stella is a multi-platform Atari 2600 VCS emulator. The Atari 2600 Video Computer System (VCS), introduced in 1977, was the most popular home video game system of the early 1980's. Now you can enjoy all of your favorite Atari 2600 games on your PC thanks to Stella!

rpcs3 SVN r37

EmuCR: rpcs3 rpcs3 SVN r37 is compiled. rpcs3 is an open source PlayStation 3 (PS3) emulator for the Microsoft Windows. Current versions can run only small homebrew for PS3. Developers are planning to make it to emulate PS3 on its speed in the near future.

QMC2 SVN r3570

EmuCR: QMC2QMC2 SVN r3570 is compiled. QMC2 is a good GUI for MAME & MESS. QMC2(M.A.M.E. Catalog / Launcher II) is the successor of one of the first XMAME/MESS GUI frontends available, QMamecat (derived from MAMECAT, which was text-only). QMC2 has been rebuilt from scratch as a Qt 4 project. Parts of the design and code were inspired by its predecessor. The new design was made as flexible as possible to minimize dependencies from frontend- and CLI-related MAME changes, which was a major deficiency of QMamecat. QMC2 uses a template-based MAME configuration scheme, which can easily be enhanced with additional command line options (defined in an XML template file).

MESS SVN r14647

EmuCR: MESSMESS SVN r14647 is compiled. MESS(Multi Emulator Super System) is an open source emulator which emulates a large variety of different systems. MESS is a source-available project which documents the hardware for a wide variety of (mostly vintage) computers, video game consoles, and calculators through software emulation, as MAME does for arcade games. As a nice side effect to this documentation, MESS allows software and games for these hardware platforms to be run on modern PCs.

fs-uae v0.9.10

EmuCR: fs-uaefs-uae v0.9.10 is released. fs-uae is a multi-platform Amiga emulator based on UAE/WinUAE, with a focus on emulating floppy-disk and CD-ROM based games. An important feature of the emulator is that it is fully controllable with a gamepad from your couch, with an on-screen GUI, which means that you can easily swap floppies and load save states with your gamepad. fs-uae is well suited to be started from an emulator frontend running on a HTPC, for instance.

renameSET.dat v0.145u3

renameSET.dat v0.145u3 is released. This project came about as a result of the continuous changes that mamedevs provide the names of the sets out whenever a new version of the executable. The reasons for these changes are manifold: correction of previous errors, addition of new games with similar names, etc.. By the time the project has expanded by collecting not only changes the name of the sets but also a kind of statistical data-base.

Mameinfo.dat v0.145u2

Mameinfo.dat v0.145u2 is released. detailed mame game information (including version added, number of players, game status, cpu/audio chips, display info and maws hall of fame ratings). Provides Recommended Games for GameEx.

DS2x86 v0.34 Beta

EmuCR:DS2x86DS2x86 v0.34 Beta is released. DS2x86 is a version of DSx86 for the SuperCard DSTwo flash cart. DSx86 is a PC emulator for Nintendo DS.

WinVZ300 (2012/02/27)

WinVZ300 (2012/02/27) is released. WinVZ300 is a windows classic VZ300 Computer emulator.

MAME v0.145u3 for Slackware

EmuCR: MAME for SlackwareMAME v0.145u3 for Slackware is released. These are MAME (and tools) packages for Slackware Linux (32-bit and 64-bit editions). MAME stands for Multiple Arcade Machine Emulator.

NRage Input Plugin v2.3 Final

EmuCR: NRage Input PluginNRage Input Plugin v2.3 Final is released. NRage Input Plugin is the Best N64 Emulation Plugin. NRage Input Plugin is for use with an N64 emulator that supports input plugins through Zilmar's input spec. Some emulators that support it are: Project64, Apollo, 1964, TR64.

no$sns v1.1

no$sns v1.1 is released. no$sns is a nocash SNES/SFC emulator/debugger for windows

MAME v0.145u3

MAMEMAME v0.145u3 is released. MAME stands for Multiple Arcade Machine Emulator. When used in conjunction with images of the original arcade game's ROM and disk data, MAME attempts to reproduce that game as faithfully as possible on a more modern general-purpose computer. MAME can currently emulate several thousand different classic arcade video games from the late 1970s through the modern era.

MAME v0.145u2

MAMEMAME v0.145u2 is released. MAME stands for Multiple Arcade Machine Emulator. When used in conjunction with images of the original arcade game's ROM and disk data, MAME attempts to reproduce that game as faithfully as possible on a more modern general-purpose computer. MAME can currently emulate several thousand different classic arcade video games from the late 1970s through the modern era.