2015-10-14

XM7'(DASH) v1.2L23/v2.9L63R23/v3.4L63R23

XM7'(DASH) v1.2L23/v2.9L63R23/v3.4L63R23 are released. XM7' is an eXcellent fujitsu Micro seven emulator for 7 platforms.

XM7'(DASH) v1.2L23/v2.9L63R23/v3.4L63R23 Changelog:
- It was to be able to enable or disable set of kanji ROM into the FM-7/8 mode.
- Kanji ROM enabled setting in the Japanese communication card, the specification change to switch considerable number DIP switch 9, FM-7, FM-77, FM77AV, it enables the setting of possible combinations Kanji ROM card, in the Japanese communication card I was in. Settings that overlap with other Kanji ROM also possible, I was trying to the case Kanji ROM in the Japanese communication card becomes invalid.
- Level 1 Kanji ROM the (KANJI.ROM or KANJI1.ROM) it was required at the time of start-up of the V1. However, and only at the start of Ali ROM set of FM-7, at start-up only in the ROM set of FM-8 was set to leave the option.
- Add FM77AV20 mode, the FM77AV20EX mode to V2. (Thanks for Ryu Takegami and Haserin)
- Add Enable information of learning RAM, the display of the high-speed mode to MMR MMR subwindow of V2 / V3
- Check the Kanji ROM at the time of the first start-up, add the ability to warning or attention to if it is not a ROM that is appropriate to the operating model.
- JIS for the first level Kanji ROM, for FM77AV for the Japanese communication card (= for FM77AV40EX Hidden dictionary ROM), corresponding to a different ROM file name.
- Kanji ROM type in use kanji ROM sub-window, and add a display, such as a state on the Japanese communication card.
- Along with the above-mentioned Kanji ROM specification changes, JIS78 emulation and, to abolish such as font undefined of invalid switch.
- For in the BREAK key is pressed FIRQ is to fix a bug that had been continuously generated, the correction to the time of release interrupt flag the timing of the release PRE INTERRUPT flag.
- It changed so that it is not possible to change behavior settings in the print dialog display.
- Original XM7 V3.4 / V2.9 / V1.1L70 code integrates except for a part of, the transplanted the following.
* Palette register window (with multi-page information)
* Emulation of genuine Mouse Set
* V2 / V3 of key encoder hidden message
* Message changes when it fails to initialize the virtual machine
* 3-speed of operation mode
* V2 / V3 of the floppy disk controller window logical / physical drive number display correspondence
* Of Japanese communication card JSUB V1L2 equivalent patch
* Windows10 correspondence Assemble memory dump window
- The active / display page register ($ FD37) change, fix the problem that content is not reflected in the palette register window There is also original XM7 V3.4 / V2.9 / V1.1L70 following limitations compared to the.
- With respect to the memory dump disassemble list, because it is in conflict with the physical address mode that was implemented in the preceding dash, it is not integrated in the current version. In Level notation 70 without 69 Nanoha It is for this reason.

Download: XM7'(DASH) (DASH) v1.2L23/v2.9L63R23/v3.4L63R23
Source: Here

0 Comments

Post a Comment