2015-09-17

WinUAE v3.2.0 Beta 12

EmuCR:WinUAEWinUAE v3.2.0 Beta 12 is released. WinUAE is the commodore amiga emulator for Windows. WinUAE is a mostly complete software emulation of the hardware of the Commodore Amiga 500/1000/2000. A Commodore Amiga, for those who don’t know, is a 16/32 bit computer system based on the Motorola 680×0 CPU and a few specially designed custom chips that provide very good graphics and sound capabilities. Its first incarnation, the A1000, appeared in 1985, followed by the highly successful A500 and A2000 models. WinUAE is a port of the originally written for Unixish systems UAE; but over time, it seems the Windows port, WinUAE has become the best version available on any platform. WinUAE is free software: you are welcome to distribute copies of it and/or modify it, under certain conditions. There is no warranty of any kind for UAE. For more details concerning these issues, please read the GNU General Public License, which describes the terms under which WinUAE is distributed.

WinUAE v3.2.0 Beta 12 Changelog:
- Boolean config true value converts to 1 and false to zero before doing any calculations. someboolentry=[1-someboolentry] custom event string now works as expected.
- Bridgeboard in VGA graphics mode only updated part of display (and sometimes nothing was updated).
- ESP (53C94, FAS216 etc..) SCSI updates to support Multi Evolution (Needs FIFO used count and does odd things)
- Multi Evolution 500/2000 SCSI controller emulation added.
- XT bridgeboard timer gate 2 pin was not hooked up in DOSBox CPU mode. ("Timer2 control function failed")
- Removed RTC status bit hack, PIC_TickIndex() works now. ("The Real Time Clock has not been initialized")
- Delay bridgeboard emulated MDA/CGA VRAM write interrupts until next vblank to reduce number of interrupts. (Real hardware may or may not do same)
- Initialize bridgeboard add-on IDE controllers after Z2 boards (was after Z3 which prevents them to initialize if used KS ROM does not support Z3 boards and at least one Z3 board was enabled).
- Adjusted MDA/CGA emulation mode hsync/vsync reporting, some programs had really slow screen updates.

Multi Evolution 500/2000:
- Not autoconfig but has boot ROM at $f00000 region. (Autoconfig is only for RAM expansion)
- Boots also under KS 1.2. (Boot ROM does some ugly system patches)
- Long word wide fake DMA.
- Boot image that also shows SCSI detection diagnostics messages.
- At least v3.0 ROM version driver does odd things, it sends MESSAGE ACCEPTED command first, then it reads the message byte.

Download: WinUAE v3.2.0 Beta 12
Source: Here

0 Comments

Post a Comment