2021-12-20

AppleWin v1.30.7.0

EmuCR:AppleWinAppleWin v1.30.7.0 is released. AppleWin (also known as Apple //e Emulator for Windows) is an open source software emulator for running Apple II programs in Microsoft Windows. AppleWin has support for most programs that could run either on the Apple II+ or the Apple IIe. By default, AppleWin emulates the Extended Keyboard IIe (better known as the Platinum IIe) with built-in 80-column text support, 128 kilobytes of RAM, two 5.25-inch floppy disk drives, a joystick, a serial card and 65C02 CPU. AppleWin supports lo-res, hi-res, and double hi-res graphics modes and can emulate both color and monochrome Apple II monitors; later versions of AppleWin also can emulate a television set used as a monitor. Both 40-column and 80-column text is supported.

AppleWin can emulate the Apple II joystick (using the PC's default controller), paddle controllers (using the computer mouse), and can also emulate the Apple II joystick using the PC keyboard. AppleWin can also use the PC speaker to emulate the Apple II's sound if no sound card is available (does not work under NT-based Windows versions). Full screen mode is available through the use of DirectX. Features added to the latest versions of AppleWin include Ethernet support using Uthernet, Mockingboard and Phasor sound card support, SSI263 speech synthesis, hard drive disk images and save states.

AppleWin v1.30.7.0 Changelog:
[Bug #997] Support VidHD card for IIgs Super Hi-Res (SHR) video modes, eg. for Total Replay box art.
Support VidHD in slot 3 (via Config GUI or '-s3 vidhd').
Only partial VidHD support - ie. just for SHR video modes, but SHR is supported for all Apple II models.
NB. AppleWin's window is slightly enlarged when VidHD card is inserted.
Command line: Allow user to specify width & height (for full-screen); and allow separate x,y scaling in full-screen mode.
eg. for 4:3 aspect ratio on monitors that support it: -no-full-screen -fs-width=1600 -fs-height=1200
Debugger: add 'shr' command to view video.
[Change #1007] HDD: Fail if r/w access touches $Cnnn I/O space
Debugger: On a HDD r/w failure, execution will break, and the debugger will show a stop reason message.
Also fix HDD write wrapping at 64KiB boundary.
[Change #996] Adapt HDD firmware to be slot-independent.
Internal only, since currently no support to specify HDD Controller card in another slot.
Debugger: Add 'brk all ' command to break on any BRK or invalid opcode.

Download: AppleWin v1.30.7.0
Source: Here

0 Comments

Post a Comment