WinUAE v6.1.0 Beta 9

WinUAE v6.1.0 Beta 9 is released. WinUAE is the commodore amiga emulator for Windows. WinUAE is a mostly complete software emulation of the hardware of the Commodore Amiga 500/1000/2000. A Commodore Amiga, for those who don’t know, is a 16/32 bit computer system based on the Motorola 680×0 CPU and a few specially designed custom chips that provide very good graphics and sound capabilities. Its first incarnation, the A1000, appeared in 1985, followed by the highly successful A500 and A2000 models. WinUAE is a port of the originally written for Unixish systems UAE; but over time, it seems the Windows port, WinUAE has become the best version available on any platform. WinUAE is free software: you are welcome to distribute copies of it and/or modify it, under certain conditions. There is no warranty of any kind for UAE. For more details concerning these issues, please read the GNU General Public License, which describes the terms under which WinUAE is distributed.

WinUAE Changelog:
- Added Vortex ATonce plus 286 bridge board emulation (https://github.com/na103/Dueottosei/). NOTE: this is quite different than Commodore bridgeboards.
- If RTG mode was active and chipset mode was invalid or syncs disabled: RTG mode FPS counter was not shown.
- RTG Integer scale mode now also supports filter 1/x integer scaling option. (1/1 = normal x.0 integer scaling, 1/2 = x.5 and x.0 scaling allowed, 1/3 = x.75 x.50, x.25, x.00 allowed and so on)
- uaegfx Picasso96 modeinfo structure pixel clock value corrected, now all modes show correct refresh rate in (for example) ScreenMode prefs. Previously different resolutions had slightly different refresh rates. (+-2Hz or so difference).
- b7 "Internal CCK counter changed to 64-bit" missed counter variable 32-bit to 64-bit update.
- Writes to extended ADF that are much longer than track max size or partial writes (write less than track size) are now emulated correctly. Previously single write was always considered full track update and very long write was not correctly written to image file.
- Fixed AM79C960 ethernet chip ID register (wrong endianness), affected at least Linux Ariadne driver ("Couldn't find AMD Ethernet Chip").
- AM79C960 DPOLL/TDMD register bits correctly emulated. Ariadne ethernet card now works in Linux without transmit timeouts.
- DP8390 based NICs (Ariadne II, AmigaNet etc) didn't work in Linux due to byteswap bug. This didn't affect later NE2000 clones. NOTE: X-Surf 100 does not work in Linux because Linux driver uses AX88796B-only features that are not yet emulated. AX88796B is NE2000 compatible but also includes AX88796B-only features.
- Ariadne II network card EEPROM stored MAC address is stored byteswapped.
- Added workaround for possible compiler optimization bug, A2065 and Ariadne work again. (b8)
- Print to file option added, if selected, path is queried and raw data coming from emulated parallel port is saved to a file in selected directory ("Print_xxx.dat", where xxx is file id number). Note that file is fully written and closed only after autoflush timeout after idle parallel port state or if Flush print job button is pressed.
- ProWizard module ripper updated to 1.70a (Stefan Reinauer).
- QEMU PPC DLLs updated (includes also UAE side update), should fix OS3.x + PPC configurations (b8) (Amiberry). NOTE: QEMU9 (32-bit) is different than QEMU11, 32-bit may not be fully fixed or may have other problems. (https://www.winuae.net/files/b/ppc_plugin_11.7z) EDIT: 7.7.2026 updated, fixes old random hang when quitting.

Download: WinUAE v6.1.0 Beta 9 x86
Download: WinUAE v6.1.0 Beta 9 x64
Source: Here