yuzu Git (2021/04/02) is complied. yuzu is a work-in-progress Nintendo Switch emulator. yuzu is an open-source project, licensed under the GPLv2 (or any later version). yuzu has been designed with portability in mind, with builds available for Windows, Linux, and macOS. The project was started in spring of 2017 by bunnei, one of the original authors of the popular Citra 3DS emulator, to experiment with and research the Nintendo Switch. Due to the similarities between Switch and 3DS, yuzu was developed as a fork of Citra. This means that it uses the same project architecture, and both emulators benefit from sharead improvements. During the early months of development, work was done in private, and progress was slow. However, as Switch reverse-engineering and homebrew development became popular, work on yuzu began to take off as well.
2021-04-02
yuzu Git (2021/04/02)
yuzu Git (2021/04/02) is complied. yuzu is a work-in-progress Nintendo Switch emulator. yuzu is an open-source project, licensed under the GPLv2 (or any later version). yuzu has been designed with portability in mind, with builds available for Windows, Linux, and macOS. The project was started in spring of 2017 by bunnei, one of the original authors of the popular Citra 3DS emulator, to experiment with and research the Nintendo Switch. Due to the similarities between Switch and 3DS, yuzu was developed as a fork of Citra. This means that it uses the same project architecture, and both emulators benefit from sharead improvements. During the early months of development, work was done in private, and progress was slow. However, as Switch reverse-engineering and homebrew development became popular, work on yuzu began to take off as well.
Ryujinx Git (2021/04/02)
Ryujinx Git (2021/04/02) is complied. Ryujinx is an open source Nintendo Switch Emulator written in C# created by gdkchan. This emulator aims at providing good performance and accuracy, a friendly interface, and consistent builds. Ryujinx is currently available for Windows, Linux, and macOS.
rpcs3 Git (2021/04/02)
rpcs3 Git (2021/04/02) is compiled. RPCS3 is an open-source Sony PlayStation 3 emulator and debugger written in C++ for Windows and Linux. The emulator has been in development since early 2011 and currently supports modern DirectX 12, Vulkan and OpenGL renderers. The emulator is capable of booting and playing a decent amount of commercial games and PlayStation 3 SDK samples. Many more titles are also becoming playable with future development by contributors.
PCSX2 Git (2021/04/02)
PCSX2 Git (2021/04/02) is compiled. PCSX2 is an open source PlayStation 2 (PS2) emulator for the Microsoft Windows and Linux operating systems. With the most recent versions, many PS2 games are playable (although speed limitations have made play-to-completion tests for many games impractical), and several games are claimed to have full functionality.
Vita3K Git (2021/04/02)
Vita3K Git (2021/04/02) is complied. Vita3K is an experimental PlayStation Vita emulator for Windows, Linux and macOS. The emulator currently runs a few homebrew programs in .vpk format. No commercial games are playable.
PCSX-Redux Git (2021/04/02)
PCSX-Redux Git (2021/04/02) is complied. This is yet another fork of the Playstation Emulator, PCSX. While the work here is very much in progress, the goal is roughly the following: Bring the codebase to more up to date code standards. Get rid of the plugin system and create a single monolithic codebase that handles all aspects of the playstation emulation. Write everything on top of SDL/OpenGL3+/ImGui for portability and readability. Improve the debugging experience. Improve the rendering experience.
Play! Git (2021/04/02)
Play! Git (2021/04/02) is complied. Play! is an attempt at creating an emulator for the PlayStation 2 (PS2) console on the Windows platform. It is currently written in C/C++. It uses an instruction caching/recompilation scheme to achieve better performance while emulating the CPU.
OpenMSX Git (2021/04/02)
OpenMSX Git (2021/04/02) is complie. OpenMSX is an open source MSX emulator which is free according to the Debian Free Software Guidelines, available under the GNU General Public License.For copyright reasons the emulator cannot be distributed with original BIOS ROM images. OpenMSX includes C-BIOS a minimal implementation of the MSX BIOS, allowing to play quite some games without the need to have an original MSX BIOS ROM image. You can also use your own BIOS ROM image if you please.
NESICIDE Git (2021/04/02)
NESICIDE Git (2021/04/02) is complied. NESICIDE is an Integrated Development Environment for the 8-bit Nintendo Entertainment System (NES). NESICIDE is a NES development application written with MFC and works only on Windows. The goal of NESICIDE2 is to bring this application into the modern age; it will support all 3 major platforms, as well as feature an easier to use interface. It will also have a community element that will allow users to share code, multimedia, and even entire projects/games. This is a new project and much is left to be done.
NanoBoyAdvance Git (2021/04/02)
NanoBoyAdvance Git (2021/04/02) is compiled. NanoboyAdvance is a Nintendo Game Boy Advance (TM) emulator written in C++17. The goal is to create a minimal, accurate and reasonably efficient Game Boy Advance emulator in modern C++. The emulator implements the core hardware completely and with high accuracy. Almost all games can be emulated without any known issues, even the 'Classic NES' titles which abuse a variety of edge-cases and undefined behaviour.
FB Neo Git (2021/04/02)
FB Neo Git (2021/04/02) is complied. FinalBurn Neo is an Emulator for Arcade Games & Select Consoles. It is based on the emulators FinalBurn and old versions of MAME.
mGBA Git (2021/04/02)
mGBA Git (2021/04/02) is compiled. mGBA is a new emulator for running Game Boy Advance games. It aims to be faster and more accurate than many existing Game Boy Advance emulators, as well as adding features that other emulators lack.
EKA2L1 Git (2021/04/02)
EKA2L1 Git (2021/04/02) is released. EKA2L1 is a Experimental Symbian OS emulator, written in C++ 17. The emulator currently emulates Symbian OS's EKA2 behavior (with planned EKA1 support), and reimplement most of its critical app servers. It can already boot many EKA2's apps and games, with EKA1 being worked on at the moment.
BizHawk Git (2021/04/02)
BizHawk Git (2021/04/02) is compiled. BizHawk is a A multi-system emulator written in C#. BizHawk provides nice features for casual gamers such as full screen, and joypad support in addition to full rerecording and debugging tools for all system cores.
Stella Git (2021/04/02)
Stella Git (2021/04/02) is compiled. Stella is a multi-platform Atari 2600 VCS emulator. The Atari 2600 Video Computer System (VCS), introduced in 1977, was the most popular home video game system of the early 1980's. Now you can enjoy all of your favorite Atari 2600 games on your PC thanks to Stella!
Caprice Forever v21.4
Caprice Forever v21.4 is released. Caprice Forever is a Amstrad CPC emulator for Windows.
WinArcadia & AmiArcadia v27.01
WinArcadia & AmiArcadia v27.01 are released. AmiArcadia and WinArcadia are multi-emulators of these Signetics-based machines: Emerson Arcadia 2001 console family (Bandai, Emerson, Grandstand, Intervision, Leisure-Vision, Leonardo, MPT-03, Ormatu, Palladium, Poppy, Robdajet, Tele-Fever, Tempest, Tryom, Tunix, etc.) (1982);Interton VC 4000 console family (Acetronic, Fountain, Interton, Prinztronic, Radofin, Rowtron, Voltmace, Waddington, etc.) (c. 1978);Elektor TV Games Computer (1979); PIPBUG-based machines (Electronics Australia 77up2 and 78up5, Signetics Adaptable Board Computer, Eurocard 2650, etc.) (c. 1977-1978);Signetics Instructor 50 trainer (1978);Central Data 2650 computer (1977);Malzak 1 and 2 coin-ops by Kitronix (c. 1980) (preliminary); and Galaxia and Astro Wars coin-ops by Zaccaria (1979-1980) (preliminary).
Mednafen v1.27.0
Mednafen v1.27.0 is released. Mednafen is a multi-game-system emulator, for various platforms, including emulation of the following systems:Atari Lynx,Famicom,GameBoy (Color),GameBoy Advance,Neo Geo Pocket (Color), NES(both NTSC and PAL),PC Engine/TurboGrafx 16 (CD) and SuperGrafx,PC-FX,WonderSwan (Color).
MAME v0.230 for Slackware
MAME v0.230 for Slackware is released. These are MAME (and tools) packages for Slackware Linux (32-bit and 64-bit editions). MAME stands for Multiple Arcade Machine Emulator.
DS4Windows v3.0.0
DS4Windows v3.0.0 is released. DS4Windows is a portable program that allows you to get the best experience while using a DualShock 4 on your PC. By emulating a Xbox 360 controller, many more games are accessible.
EmuTos CVS (2021/04/02)
EmuTos CVS (2021/04/02) is released. EmuTos is a GEMDOS compatible operating system for Atari ST series computers. It is made from Digital Research's GPLed original sources and is a free and open source replacement for common TOS images for Atari ST emulators.
DOSBox-X v0.83.12 (2021/04/01)
DOSBox-X v0.83.12 (2021/04/01) is released. DOSBox-x is a branch of DOSBox. DOSBox emulates an Intel x86 PC, complete with sound, graphics, mouse, joystick, modem, etc., necessary for running many old MS-DOS games that simply cannot be run on modern PCs and operating systems, such as Microsoft Windows XP, Windows Vista, Linux and FreeBSD.
CEMU Graphic Packs v770
CEMU Graphic Packs v770 is released. It is a Community Graphic Packs for Cemu. Cemu is a Nintendo Wii U emulator that runs commercial games. Highly experimental software to emulate Wii U applications on PC.