2021-10-03

yuzu Git (2021/10/03)

EmuCR: yuzuyuzu Git (2021/10/03) is compiled. yuzu is a work-in-progress Nintendo Switch emulator. yuzu is an open-source project, licensed under the GPLv2 (or any later version). yuzu has been designed with portability in mind, with builds available for Windows, Linux, and macOS. The project was started in spring of 2017 by bunnei, one of the original authors of the popular Citra 3DS emulator, to experiment with and research the Nintendo Switch. Due to the similarities between Switch and 3DS, yuzu was developed as a fork of Citra. This means that it uses the same project architecture, and both emulators benefit from sharead improvements. During the early months of development, work was done in private, and progress was slow. However, as Switch reverse-engineering and homebrew development became popular, work on yuzu began to take off as well.

rpcs3 Git (2021/10/03)

EmuCR: rpcs3 rpcs3 Git (2021/10/03) is compiled. RPCS3 is an open-source Sony PlayStation 3 emulator and debugger written in C++ for Windows and Linux. The emulator has been in development since early 2011 and currently supports modern DirectX 12, Vulkan and OpenGL renderers. The emulator is capable of booting and playing a decent amount of commercial games and PlayStation 3 SDK samples. Many more titles are also becoming playable with future development by contributors.

PCSX2 Git (2021/10/03)

EmuCR: PCSX2PCSX2 Git (2021/10/03) is compiled. PCSX2 is a free and open-source PlayStation 2 (PS2) emulator. Its purpose is to emulate the PS2's hardware, using a combination of MIPS CPU Interpreters, Recompilers and a Virtual Machine which manages hardware states and PS2 system memory. This allows you to play PS2 games on your PC, with many additional features and benefits. The PCSX2 project has been running for more than ten years. Past versions could only run a few public domain game demos, but newer versions can run most games at full speed, including popular titles such as Final Fantasy X and Devil May Cry 3.

Vita3K Git (2021/10/03)

EmuCR: Vita3KVita3K Git (2021/10/03) is compiled. Vita3K is an experimental PlayStation Vita emulator for Windows, Linux and macOS. The emulator currently runs a few homebrew programs in .vpk format. No commercial games are playable.

PCSX-Redux Git (2021/10/03)

EmuCR: PCSX-ReduxPCSX-Redux Git (2021/10/03) is compiled. This is yet another fork of the Playstation Emulator, PCSX. While the work here is very much in progress, the goal is roughly the following: Bring the codebase to more up to date code standards. Get rid of the plugin system and create a single monolithic codebase that handles all aspects of the playstation emulation. Write everything on top of SDL/OpenGL3+/ImGui for portability and readability. Improve the debugging experience. Improve the rendering experience.

melonDS Git (2021/10/03)

EmuCR: melonDSmelonDS Git (2021/10/03) is compiled. melonDS is an open source Nintendo DS(NDS) emulator. melonDS is part of a second wave of DS emulators. There are a few other emulator projects that are part of it, which you might have already heard of. Either way, check them out!

puNES Git (2021/10/03)

EmuCR: puNESpuNES Git (2021/10/03) is compiled. puNES is a NES emulator. Currently the program supports mappers 0, MMC1, UNROM, CNROM, and the sound is available. It uses the SDL libraries and it works on both Linux and Windows.

GLideN64 Git (2021/10/03)

EmuCR: GLideN64GLideN64 Git (2021/10/03) is compiled. GLideN64 is a new generation, open-source graphics plugin for N64 emulators

FB Neo Git (2021/10/03)

EmuCR: FB AlphaFB Neo Git (2021/10/03) is compiled. FinalBurn Neo is an Emulator for Arcade Games & Select Consoles. It is based on the emulators FinalBurn and old versions of MAME.

Caprice32 Git (2021/10/03)

EmuCR: Caprice32Caprice32 Git (2021/10/03) is released. Caprice32 is an emulator of the Amstrad CPC 8bit home computer range. Caprice32 is a software emulator of the Amstrad CPC 8bit home computer series running on Linux and Windows. The emulator faithfully imitates the CPC464, CPC664, and CPC6128 models. By recreating the operations of all hardware components at a low level, the emulator achieves a high degree of compatibility with original CPC software. These programs or games can be run unmodified at real-time or higher speeds, depending on the emulator host environment.

BizHawk Git (2021/10/03)

EmuCR: BizHawkBizHawk Git (2021/10/03) is compiled. BizHawk is a A multi-system emulator written in C#. BizHawk provides nice features for casual gamers such as full screen, and joypad support in addition to full rerecording and debugging tools for all system cores.

Altirra v4.00 Test 43

EmuCR:AltirraAltirra v4.0 Test 43 is released. Altirra is an Atari 8 bit Emulator on the Windows/DOS platform. Altirra emulates several models of the 8-bit Atari computers. This includes the the 800, 800XL, and 130XE versions. It has a lot of options, and compatibility is decent especially given the emulator's early stages. It also supports some copy protected games properly in emulation.

Ludo v0.16.6

Ludo v0.16.6 is released. Ludo is a work in progress libretro frontend written in go. It works on OSX, Linux, Linux ARM and Windows. libretro is an API designed mainly for games and emulators.

DOSBox Game Launcher v0.94

EmuCR: DBGLDOSBox Game Launcher v0.94 is released. DBGL is a Java frontend for DOSBox, based largely upon the proven interface of D-Fend.

CatShanty2 v1.10405

CatShanty2 v1.10405 is released. This is a Japanese Multi Systemes Emulator FrontEnd.

JoyToKey v6.7

EmuCR: JoyToKeyJoyToKey v6.7 is released. This software is a keyboard emulator for joysticks. It converts joystick input into keyboard input (and mouse input).Use it when you want to control an application with joysticks that doesn't support joystick input. If you wish, you can control even Word, Excel, etc. with joysticks!

History.dat v2.36

EmuCR:MameHistory.dat v2.36 is released. History.dat is a searchable & comprehensive database which provides a WIP list of known antique & modern arcade games, casino games & coin-operated machines, including: arcade video games, pinballs, slot machines / pachislots, pachinkos, bat games, bingos, gun games, bowlers / shuffle alleys, jukeboxes, musical instruments, trade stimulators, fortune tellers, strength testers, kiddie rides, redemption games, allwins, working models, vending machines, pool tables, viewers, shockers, scales & more...

AppleWin v1.30.5.0

EmuCR:AppleWinAppleWin v1.30.5.0 is released. AppleWin (also known as Apple //e Emulator for Windows) is an open source software emulator for running Apple II programs in Microsoft Windows. AppleWin has support for most programs that could run either on the Apple II+ or the Apple IIe. By default, AppleWin emulates the Extended Keyboard IIe (better known as the Platinum IIe) with built-in 80-column text support, 128 kilobytes of RAM, two 5.25-inch floppy disk drives, a joystick, a serial card and 65C02 CPU.

My Nes v7.10.7945.40903

EmuCR:My NesMy Nes v7.10.7945.40903 is released. My Nes is a portable open source NES/FAMICOM emulator written in C#. It's EXACT nes cycle emulator, very accurate and uses exact ppu scanline timing. My Nes compatibility is very high, and most of the games that supported run perfectly.

WinVICE r40840

EmuCR: SDLVICE WinVICE r40840 is released. WinVICE is a program that executes programs intended for the old 8-bit computers. The current version emulates the C64, the C128, the VIC20, all the PET models (except the SuperPET 9000, which is out of line anyway), the PLUS4 and the CBM-II (aka C610).

EmuTos CVS (2021/10/02)

EmuCR: EmuTosEmuTos CVS (2021/10/02) is released. EmuTos is a GEMDOS compatible operating system for Atari ST series computers. It is made from Digital Research's GPLed original sources and is a free and open source replacement for common TOS images for Atari ST emulators.

Cxbx Reloaded (2021/10/03)

EmuCR:Xbox EmulatorsCxbx Reloaded (2021/10/03) is released. Cxbx-Reloaded is an emulator for running Microsoft Xbox (and eventually, Chihiro) games on Microsoft Windows. The project began life as a fork of Cxbx with added 64-bit support. Work is currently underway to backport some of the improvements from Dxbx. Cxbx-Reloaded is still pretty unstable, don't expect it to run much at this point.