2021-12-29

yuzu Git (2021/12/29)

EmuCR: yuzuyuzu Git (2021/12/29) is compiled. yuzu is a work-in-progress Nintendo Switch emulator. yuzu is an open-source project, licensed under the GPLv2 (or any later version). yuzu has been designed with portability in mind, with builds available for Windows, Linux, and macOS. The project was started in spring of 2017 by bunnei, one of the original authors of the popular Citra 3DS emulator, to experiment with and research the Nintendo Switch. Due to the similarities between Switch and 3DS, yuzu was developed as a fork of Citra. This means that it uses the same project architecture, and both emulators benefit from sharead improvements. During the early months of development, work was done in private, and progress was slow. However, as Switch reverse-engineering and homebrew development became popular, work on yuzu began to take off as well.

Ryujinx Git (2021/12/29)

EmuCR: RyujinxRyujinx Git (2021/12/29) is compiled. Ryujinx is an open source Nintendo Switch Emulator written in C# created by gdkchan. This emulator aims at providing good performance and accuracy, a friendly interface, and consistent builds. Ryujinx is currently available for Windows, Linux, and macOS.

PCSX2 Git (2021/12/29)

EmuCR: PCSX2PCSX2 Git (2021/12/29) is compiled. PCSX2 is a free and open-source PlayStation 2 (PS2) emulator. Its purpose is to emulate the PS2's hardware, using a combination of MIPS CPU Interpreters, Recompilers and a Virtual Machine which manages hardware states and PS2 system memory. This allows you to play PS2 games on your PC, with many additional features and benefits. The PCSX2 project has been running for more than ten years. Past versions could only run a few public domain game demos, but newer versions can run most games at full speed, including popular titles such as Final Fantasy X and Devil May Cry 3.

Xenia Git (2021/12/29)

EmuCR: XeniaXenia Git (2021/12/29) is compiled. Xenia is an experimental emulator for the Xbox 360. It does not run games (yet).

Vita3K Git (2021/12/29)

EmuCR: Vita3KVita3K Git (2021/12/29) is compiled. Vita3K is an experimental PlayStation Vita emulator for Windows, Linux and macOS. The emulator currently runs a few homebrew programs in .vpk format. No commercial games are playable.

PPSSPP Git (2021/12/29)

EmuCR: PPSSPPPPSSPP Git (2021/12/29) is compiled. PPSSPP is a fast and portable PSP emulator for Android, Windows, Mac, and Linux, written in C++.

Fceux Git (2021/12/29)

EmuCR:FceuxFceux Git (2021/12/29) is compiled. FCEUX is a cross platform, NTSC and PAL Famicom/NES emulator that is an evolution of the original FCE Ultra emulator. Over time FCE Ultra had separated into many separate branches. The concept behind FCEUX is to merge elements from FCE Ultra, FCEU rerecording, FCEUXD, FCEUXDSP, and FCEU-mm into a single branch of FCEU. As the X implies, it is an all-encompassing FCEU emulator that gives the best of all worlds for the general player, the ROM-hacking community, and the Tool-Assisted Speedrun Community.

Dolphin Git 5.0-15716

EmuCR: DolphinDolphin Git 5.0-15716 is compiled. This is the trunk of Dolphin Project. Dolphin is the first Gamecube emulator able to run commercial games! Dolphin is a Gamecube, Wii and Triforce (the arcade machine based on the Gamecube) emulator which supports many extra features and abilities not present on the original consoles. It has a partial Wii support and plays most Gamecube games.

mGBA Git (2021/12/29)

EmuCR: mGBAmGBA Git (2021/12/29) is compiled. mGBA is a new emulator for running Game Boy Advance games. It aims to be faster and more accurate than many existing Game Boy Advance emulators, as well as adding features that other emulators lack.

FB Neo Git (2021/12/29)

EmuCR: FB AlphaFB Neo Git (2021/12/29) is compiled. FinalBurn Neo is an Emulator for Arcade Games & Select Consoles. It is based on the emulators FinalBurn and old versions of MAME.

BizHawk Git (2021/12/29)

EmuCR: BizHawkBizHawk Git (2021/12/29) is compiled. BizHawk is a A multi-system emulator written in C#. BizHawk provides nice features for casual gamers such as full screen, and joypad support in addition to full rerecording and debugging tools for all system cores.

Angrylion RDP Plus Git (2021/12/29)

EmuCR: Angrylion RDP PlusAngrylion RDP Plus Git (2021/12/29) is compiled. This is a conservative fork of angrylion's RDP plugin that aims to add new features while retaining the accuracy of the original plugin.

CPCEC / ZXSEC (2021/12/17)

CPCEC / ZXSEC (2021/12/17) is released. CPCEC is an emulator of the family of home microcomputers Amstrad CPC (models 464, 664 and 6128) whose goal is to be loyal to the original hardware and efficient in standard modern systems. Thus it brings a faithful emulation of the Z80 microprocessor and it replicates the behavior of the CRTC 6845 and Gate Array video chips, the PSG AY-3-8912 sound chip, the remaining circuits found in the original hardware, and the tape deck and floppy disc drive that made possible loading and running software. ZXSEC is an emulator of the Sinclair Spectrum family (48k, 128k, +2/Plus2 and +3/Plus3) based on the components it shared with the Amstrad CPC family: the Z80 microprocessor, the PSG AY-3-8192 sound chip, the tape system and the NEC765 disc drive controller.

ARCADE v0.239

EmuCR:MAMEUIFXARCADE v0.239 is released. ARCADE is a derivative unofficial build based on the MAMEUIFX source code. MAMEUIFX has more improvements over regular MAME.

MESSUI v0.239

EmuCR: MESSMESSUI v0.239 is released. MESSUI is a unoffical builds of MESS with NEWUI. MESS is an open source project which documents the hardware for a wide variety of (mostly vintage) computers, video game consoles, and calculators through software emulation, as MAME does for arcade games. As a nice side effect to this documentation, MESS allows software and games for these hardware platforms to be run on modern PCs.

MameUI v0.239

EmuCR:MameUIMameUI v0.239 is released. MameUI [formerly Mame32] is the GUI version of the Multiple Arcade Machine Emulator, a program which seeks to document the internal hardware and code of all arcade games. Originally authored in 1997 by Chris Kirmse, it was the first port of Mame™ to the Windows platform.

WolfMame v0.239

WolfMame v0.239 is released. WolfMAME is a build which is optomised for MARP - MAME Action Replay Page, where literally thousands of MAME fans play, save and upload highscore attempts. WolfMAME does not allow the player to pause games, use cheats, change DIP switches etc to gain an unfair advantage.

Playnite v9.13

EmuCR: PlaynitePlaynite v9.13 is released. Open source video game library manager and launcher with support for 3rd party libraries like Steam, GOG, Origin, Battle.net and Uplay. Including game emulation support, providing one unified interface for your games.

Speccy v5.9

EmuCR:Speccy Speccy v5.9 is released. Speccy is a ZX Spectrum Emulator. Speccy emulates 16kB, 48kB, and 128kB versions of Sinclair ZX Spectrum, as well as Spectrum +2, +2A, and +3, as well as Timex Sinclair models.

GameEx v17.13

EmuCR:GameEx GameEx v17.13 is released. GameEx is a graphical DirectX based front-end for MAME, Zinc, Daphne, PC Games, and all command line based game emulators, along with being a good Home Theatre PC solution. It also makes a good CarPC and touchscreen frontend. The original goal was for it to be used on Windows XP Media Center and Arcade Cabinets although it will run on any version of Windows 98, ME, 2000, XP and Vista. For just $17 (USD) you can too unlock the full potential of the front end.

SDLMAME v0.239

EmuCR: SDLMAMESDLMAME v0.239 is released. SDLMAME is a port of the popular MAME™ emulator to the SDL library. It runs on many different platforms, including both 32- and 64-bit Linux.

MameUI64 v0.239

EmuCR:MameUIMameUI64 v0.239 is released. MameUI [formerly Mame32] is the GUI version of the Multiple Arcade Machine Emulator, a program which seeks to document the internal hardware and code of all arcade games. Originally authored in 1997 by Chris Kirmse, it was the first port of Mame™ to the Windows platform.

HBMAME v0.239

EmuCR: HBMAMEHBMAME v0.239 is released. HBMAME (HomeBrew MAME) is a derivate of MAME, and contains various hacks and homebrews that are not included in MAME. It is based on the latest MAME source from SVN at the time of release.

Mameinfo.dat v0.239

Mameinfo.dat v0.239 is released. detailed mame game information (including version added, number of players, game status, cpu/audio chips, display info and maws hall of fame ratings). Provides Recommended Games for GameEx.

MAME v0.239

MAMEMAME v0.239 is released. MAME stands for Multiple Arcade Machine Emulator. When used in conjunction with images of the original arcade game's ROM and disk data, MAME attempts to reproduce that game as faithfully as possible on a more modern general-purpose computer. MAME can currently emulate several thousand different classic arcade video games from the late 1970s through the modern era.

WinVICE r41434

EmuCR: SDLVICE WinVICE r41434 is released. WinVICE is a program that executes programs intended for the old 8-bit computers. The current version emulates the C64, the C128, the VIC20, all the PET models (except the SuperPET 9000, which is out of line anyway), the PLUS4 and the CBM-II (aka C610).

XEMU (2021/12/29)

EmuCR:Xbox EmulatorsXEMU (2021/12/29) is released. xemu is an open-source, cross-platform application that emulates the hardware of the original Xbox game console, allowing users to play their Xbox games on Windows, macOS, and Linux systems. This project is focused on making significant forward progress in terms of features, performance, stability, and user experience in Xbox emulation. This project is an active fork of the XQEMU project, which is based on the very popular and highly actively maintained QEMU full system emulator project.

puNES v0.108

EmuCR: puNESpuNES v0.108 is released. puNES is a NES emulator. Currently the program supports mappers 0, MMC1, UNROM, CNROM, and the sound is available. It uses the SDL libraries and it works on both Linux and Windows.

Cxbx Reloaded (2021/12/29)

EmuCR:Xbox EmulatorsCxbx Reloaded (2021/12/29) is released. Cxbx-Reloaded is an emulator for running Microsoft Xbox (and eventually, Chihiro) games on Microsoft Windows. The project began life as a fork of Cxbx with added 64-bit support. Work is currently underway to backport some of the improvements from Dxbx. Cxbx-Reloaded is still pretty unstable, don't expect it to run much at this point.