yuzu Git (2022/02/04)

yuzu Git (2022/02/04) is compiled. yuzu is a work-in-progress Nintendo Switch emulator. yuzu is an open-source project, licensed under the GPLv2 (or any later version). yuzu has been designed with portability in mind, with builds available for Windows, Linux, and macOS. The project was started in spring of 2017 by bunnei, one of the original authors of the popular Citra 3DS emulator, to experiment with and research the Nintendo Switch. Due to the similarities between Switch and 3DS, yuzu was developed as a fork of Citra. This means that it uses the same project architecture, and both emulators benefit from sharead improvements. During the early months of development, work was done in private, and progress was slow. However, as Switch reverse-engineering and homebrew development became popular, work on yuzu began to take off as well.

Ryujinx Git (2022/02/04)

Ryujinx Git (2022/02/04) is compiled. Ryujinx is an open source Nintendo Switch Emulator written in C# created by gdkchan. This emulator aims at providing good performance and accuracy, a friendly interface, and consistent builds. Ryujinx is currently available for Windows, Linux, and macOS.

rpcs3 Git (2022/02/04)

rpcs3 Git (2022/02/04) is compiled. RPCS3 is an open-source Sony PlayStation 3 emulator and debugger written in C++ for Windows and Linux. The emulator has been in development since early 2011 and currently supports modern DirectX 12, Vulkan and OpenGL renderers. The emulator is capable of booting and playing a decent amount of commercial games and PlayStation 3 SDK samples. Many more titles are also becoming playable with future development by contributors.

PCSX2 Git (2022/02/04)

PCSX2 Git (2022/02/04) is compiled. PCSX2 is a free and open-source PlayStation 2 (PS2) emulator. Its purpose is to emulate the PS2's hardware, using a combination of MIPS CPU Interpreters, Recompilers and a Virtual Machine which manages hardware states and PS2 system memory. This allows you to play PS2 games on your PC, with many additional features and benefits. The PCSX2 project has been running for more than ten years. Past versions could only run a few public domain game demos, but newer versions can run most games at full speed, including popular titles such as Final Fantasy X and Devil May Cry 3.

PCSX-Redux Git (2022/02/04)

PCSX-Redux Git (2022/02/04) is compiled. This is yet another fork of the Playstation Emulator, PCSX. While the work here is very much in progress, the goal is roughly the following: Bring the codebase to more up to date code standards. Get rid of the plugin system and create a single monolithic codebase that handles all aspects of the playstation emulation. Write everything on top of SDL/OpenGL3+/ImGui for portability and readability. Improve the debugging experience. Improve the rendering experience.

Snes9x Git (2022/02/01)

Snes9x Git (2022/02/01) is compiled. Snes9x is a portable, freeware Super Nintendo Entertainment System (SNES) emulator. It basically allows you to play most games designed for the SNES and Super Famicom Nintendo game systems on your PC or Workstation; which includes some real gems that were only ever released in Japan. Snes9x is the result of well over three years worth of part-time hacking, coding, recoding, debugging, divorce, etc. (just kidding about the divorce bit). Snes9x is coded in C++, with three assembler CPU emulation cores on the i386 Linux and Windows ports.

VisualBoyAdvance-M Git (2022/02/04)

VisualBoyAdvance-M Git (2022/02/04) is compiled. VisualBoyAdvance-M(VBA-M) is a [Super] Game Boy [Color / Advance] emulator for Windows, Linux & Mac. Here you can get information about the latest development build of the Windows version and download it while you're at it.

Dolphin Git 5.0-15997

Dolphin Git 5.0-15997 is compiled. This is the trunk of Dolphin Project. Dolphin is the first Gamecube emulator able to run commercial games! Dolphin is a Gamecube, Wii and Triforce (the arcade machine based on the Gamecube) emulator which supports many extra features and abilities not present on the original consoles. It has a partial Wii support and plays most Gamecube games.

Play! Git (2022/02/04)

Play! Git (2022/02/04) is compiled. Play! is an attempt at creating an emulator for the PlayStation 2 (PS2) console on the Windows platform. It is currently written in C/C++. It uses an instruction caching/recompilation scheme to achieve better performance while emulating the CPU.

Stella Git (2022/02/04)

Stella Git (2022/02/04) is compiled. Stella is a multi-platform Atari 2600 VCS emulator. The Atari 2600 Video Computer System (VCS), introduced in 1977, was the most popular home video game system of the early 1980's. Now you can enjoy all of your favorite Atari 2600 games on your PC thanks to Stella!

puNES Git (2022/02/04)

puNES Git (2022/02/04) is compiled. puNES is a NES emulator. Currently the program supports mappers 0, MMC1, UNROM, CNROM, and the sound is available. It uses the SDL libraries and it works on both Linux and Windows.

OpenMSX Git (2022/02/04)

OpenMSX Git (2022/02/04) is compiled. OpenMSX is an open source MSX emulator which is free according to the Debian Free Software Guidelines, available under the GNU General Public License.For copyright reasons the emulator cannot be distributed with original BIOS ROM images. OpenMSX includes C-BIOS a minimal implementation of the MSX BIOS, allowing to play quite some games without the need to have an original MSX BIOS ROM image. You can also use your own BIOS ROM image if you please.

mGBA Git (2022/02/04)

mGBA Git (2022/02/04) is compiled. mGBA is a new emulator for running Game Boy Advance games. It aims to be faster and more accurate than many existing Game Boy Advance emulators, as well as adding features that other emulators lack.

FB Neo Git (2022/02/04)

FB Neo Git (2022/02/04) is compiled. FinalBurn Neo is an Emulator for Arcade Games & Select Consoles. It is based on the emulators FinalBurn and old versions of MAME.

DOSBox-Staging Git (2022/02/04)

DOSBox-Staging Git (2022/02/04) is compiled. This repository attempts to modernize the DOSBox project by using current development practices and tools, fixing issues, adding features that better support today's systems, and sending patches upstream.

BizHawk Git (2022/02/04)

BizHawk Git (2022/02/04) is compiled. BizHawk is a A multi-system emulator written in C#. BizHawk provides nice features for casual gamers such as full screen, and joypad support in addition to full rerecording and debugging tools for all system cores.

WinUAE v4.9.1

WinUAE v4.9.1 is released. WinUAE is the commodore amiga emulator for Windows. WinUAE is a mostly complete software emulation of the hardware of the Commodore Amiga 500/1000/2000. A Commodore Amiga, for those who don’t know, is a 16/32 bit computer system based on the Motorola 680×0 CPU and a few specially designed custom chips that provide very good graphics and sound capabilities. Its first incarnation, the A1000, appeared in 1985, followed by the highly successful A500 and A2000 models. WinUAE is a port of the originally written for Unixish systems UAE; but over time, it seems the Windows port, WinUAE has become the best version available on any platform. WinUAE is free software: you are welcome to distribute copies of it and/or modify it, under certain conditions. There is no warranty of any kind for UAE. For more details concerning these issues, please read the GNU General Public License, which describes the terms under which WinUAE is distributed.

Emusak UI v1.0.109

Emusak UI v1.0.109 is released. Emusak-ui is a graphical mod for Emusak. This is a tool which allows you to download saves and shaders for Nintendo Switch emulators using a compatible Emusak backend supported by both Linux and Windows.

Flycast Dojo v0.4.29

Flycast Dojo v0.4.29 is released. Flycast Dojo is a fork of Flycast, a multi-platform Sega Dreamcast, Naomi and Atomiswave emulator derived from Reicast, with a focus on netplay features and replay. We intend to keep Flycast Dojo updated with the latest downstream changes made to the parent project. Flycast is a multi-platform Sega Dreamcast, Naomi and Atomiswave emulator derived from reicast.

Altirra v4.10 Test 7

Altirra v4.1 Test 7 is released. Altirra is an Atari 8 bit Emulator on the Windows/DOS platform. Altirra emulates several models of the 8-bit Atari computers. This includes the the 800, 800XL, and 130XE versions. It has a lot of options, and compatibility is decent especially given the emulator's early stages. It also supports some copy protected games properly in emulation.

m64p (2022/02/03)

m64p (2022/02/03) is released. m64p uses mupen64plus-gui, a brand new mupen64plus frontend written in Qt5. It supports all thing things you’d expect from a frontend (savestate management, pausing, screenshots, etc..). m64p comes bundled with GLideN64 for the graphics plugin. It should give you the best out-of-the-box experience available for N64 gaming.

WinUAE v4.9.1 Beta 9

WinUAE v4.9.1 Beta 9 is released. WinUAE is the commodore amiga emulator for Windows. WinUAE is a mostly complete software emulation of the hardware of the Commodore Amiga 500/1000/2000. A Commodore Amiga, for those who don’t know, is a 16/32 bit computer system based on the Motorola 680×0 CPU and a few specially designed custom chips that provide very good graphics and sound capabilities. Its first incarnation, the A1000, appeared in 1985, followed by the highly successful A500 and A2000 models. WinUAE is a port of the originally written for Unixish systems UAE; but over time, it seems the Windows port, WinUAE has become the best version available on any platform. WinUAE is free software: you are welcome to distribute copies of it and/or modify it, under certain conditions. There is no warranty of any kind for UAE. For more details concerning these issues, please read the GNU General Public License, which describes the terms under which WinUAE is distributed.

My Nes v7.12.8069.42227

My Nes v7.12.8069.42227 is released. My Nes is a portable open source NES/FAMICOM emulator written in C#. It's EXACT nes cycle emulator, very accurate and uses exact ppu scanline timing. My Nes compatibility is very high, and most of the games that supported run perfectly.

Raine v0.93

Raine v0.93 is released. RAINE is an Emulator for Arcade games. Raine is a M68000 and M68020 arcade game emulator. Raine emulates some M68000 and M68020 arcade games and is mainly focused on Taito and Jaleco games hardware. It started as an experiment with the Rainbow Islands romset, dumped by Aracorn/Romlist. Raine can emulate many nice games now, and new games (previously unemulated) are appearing weekly.

WinVICE r41727

WinVICE r41727 is released. WinVICE is a program that executes programs intended for the old 8-bit computers. The current version emulates the C64, the C128, the VIC20, all the PET models (except the SuperPET 9000, which is out of line anyway), the PLUS4 and the CBM-II (aka C610).

Fceux v2.6.2

Fceux v2.6.2 is released. FCEUX is a cross platform, NTSC and PAL Famicom/NES emulator that is an evolution of the original FCE Ultra emulator. Over time FCE Ultra had separated into many separate branches. The concept behind FCEUX is to merge elements from FCE Ultra, FCEU rerecording, FCEUXD, FCEUXDSP, and FCEU-mm into a single branch of FCEU. As the X implies, it is an all-encompassing FCEU emulator that gives the best of all worlds for the general player, the ROM-hacking community, and the Tool-Assisted Speedrun Community.

Cxbx Reloaded (2022/02/04)

Cxbx Reloaded (2022/02/04) is released. Cxbx-Reloaded is an emulator for running Microsoft Xbox (and eventually, Chihiro) games on Microsoft Windows. The project began life as a fork of Cxbx with added 64-bit support. Work is currently underway to backport some of the improvements from Dxbx. Cxbx-Reloaded is still pretty unstable, don't expect it to run much at this point.