2023-10-03

Ryujinx Git (2023/10/03)

EmuCR: RyujinxRyujinx Git (2023/10/03) is compiled. Ryujinx is an open source Nintendo Switch Emulator written in C# created by gdkchan. This emulator aims at providing good performance and accuracy, a friendly interface, and consistent builds. Ryujinx is currently available for Windows, Linux, and macOS.

yuzu Git (2023/10/03)

EmuCR: yuzuyuzu Git (2023/10/03) is compiled. yuzu is a work-in-progress Nintendo Switch emulator. yuzu is an open-source project, licensed under the GPLv2 (or any later version). yuzu has been designed with portability in mind, with builds available for Windows, Linux, and macOS. The project was started in spring of 2017 by bunnei, one of the original authors of the popular Citra 3DS emulator, to experiment with and research the Nintendo Switch. Due to the similarities between Switch and 3DS, yuzu was developed as a fork of Citra. This means that it uses the same project architecture, and both emulators benefit from sharead improvements. During the early months of development, work was done in private, and progress was slow. However, as Switch reverse-engineering and homebrew development became popular, work on yuzu began to take off as well.

rpcs3 Git (2023/10/03)

EmuCR: rpcs3 rpcs3 Git (2023/10/03) is compiled. RPCS3 is an open-source Sony PlayStation 3 emulator and debugger written in C++ for Windows and Linux. The emulator has been in development since early 2011 and currently supports modern DirectX 12, Vulkan and OpenGL renderers. The emulator is capable of booting and playing a decent amount of commercial games and PlayStation 3 SDK samples. Many more titles are also becoming playable with future development by contributors.

PCSX2 Git (2023/10/03)

EmuCR: PCSX2PCSX2 Git (2023/10/03) is compiled. PCSX2 is a free and open-source PlayStation 2 (PS2) emulator. Its purpose is to emulate the PS2's hardware, using a combination of MIPS CPU Interpreters, Recompilers and a Virtual Machine which manages hardware states and PS2 system memory. This allows you to play PS2 games on your PC, with many additional features and benefits.

Citra Git (2023/10/03)

EmuCR: CitraCitra Git (2023/10/03) is compiled. This is the trunk of Citra Project. Citra is an experimental open-source Nintendo 3DS emulator/debugger written in C++. At this time, it only emulates a very small subset of 3DS hardware, and therefore is only useful for booting/debugging very simple homebrew demos. Citra is licensed under the GPLv2. Refer to the license.txt file included.

melonDS Git (2023/10/03)

EmuCR: melonDSmelonDS Git (2023/10/03) is compiled. melonDS is an open source Nintendo DS(NDS) emulator. melonDS is part of a second wave of DS emulators. There are a few other emulator projects that are part of it, which you might have already heard of. Either way, check them out!

Fceux Git (2023/10/03)

EmuCR:FceuxFceux Git (2023/10/03) is compiled. FCEUX is a cross platform, NTSC and PAL Famicom/NES emulator that is an evolution of the original FCE Ultra emulator. Over time FCE Ultra had separated into many separate branches. The concept behind FCEUX is to merge elements from FCE Ultra, FCEU rerecording, FCEUXD, FCEUXDSP, and FCEU-mm into a single branch of FCEU. As the X implies, it is an all-encompassing FCEU emulator that gives the best of all worlds for the general player, the ROM-hacking community, and the Tool-Assisted Speedrun Community.

Play! Git (2023/10/03)

EmuCR: Play!Play! Git (2023/10/03) is compiled. Play! is an attempt at creating an emulator for the PlayStation 2 (PS2) console on the Windows platform. It is currently written in C/C++. It uses an instruction caching/recompilation scheme to achieve better performance while emulating the CPU.

puNES Git (2023/10/03)

EmuCR: puNESpuNES Git (2023/10/03) is compiled. puNES is a NES emulator. Currently the program supports mappers 0, MMC1, UNROM, CNROM, and the sound is available. It uses the SDL libraries and it works on both Linux and Windows.

PPSSPP Git (2023/10/03)

EmuCR: PPSSPPPPSSPP Git (2023/10/03) is compiled. PPSSPP is a fast and portable PSP emulator for Android, Windows, Mac, and Linux, written in C++.

Dolphin Git 5.0-20186

EmuCR: DolphinDolphin Git 5.0-20186 is compiled. This is the trunk of Dolphin Project. Dolphin is the first Gamecube emulator able to run commercial games! Dolphin is a Gamecube, Wii and Triforce (the arcade machine based on the Gamecube) emulator which supports many extra features and abilities not present on the original consoles. It has a partial Wii support and plays most Gamecube games.

FB Neo Git (2023/10/03)

EmuCR: FB AlphaFB Neo Git (2023/10/03) is compiled. FinalBurn Neo is an Emulator for Arcade Games & Select Consoles. It is based on the emulators FinalBurn and old versions of MAME.

Erockus Arcade v11.3

EmuCR: Erockus ArcadeErockus Arcade v11.3 is released. Erockus ARCADE is a simple frontend for MAME.

Cemu v2.0-55

EmuCR: WiiUCemu v2.0-55 is released. Cemu is a Nintendo Wii U emulator that runs commercial games. Highly experimental software to emulate Wii U applications on PC. It's written in C/C++ and is being actively developed with new features and fixes to increase compatibility, convenience and usability.

DREAMM v2.1.1

EmuCR: DREAMMDREAMM v2.1.1 is released. DREAMM(DOS Retro-Emulation Arena for Maniac Mansion) is a way to play your original DOS LucasArts adventure games with full fidelity to the original, without the hassle of setting up a general-purpose emulator. It was created by Aaron Giles.

Flycast Dojo v6.3

EmuCR: Flycast Flycast Dojo v6.3 is released. Flycast Dojo is a fork of Flycast, a multi-platform Sega Dreamcast, Naomi and Atomiswave emulator derived from Reicast, with a focus on netplay features and replay. We intend to keep Flycast Dojo updated with the latest downstream changes made to the parent project. Flycast is a multi-platform Sega Dreamcast, Naomi and Atomiswave emulator derived from reicast.

GroovyMame v0.259 Switchres 2.002w

EmuCR: GroovyMameGroovyMame v0.258 Switchres 2.002v is released. GroovyMame is a custom M.A.M.E. build mainly aimed at CRT monitors, as we are convinced CRT technology is a must when it comes to enjoying emulation in its full glory. However you can use GroovyMAME to alliviate some of the annoyances associated to emulation on LCD displays, specially for those models which are capable of refreshing at custom rates.

History.dat v2.59

EmuCR:MameHistory.dat v2.59 is released. History.dat is a searchable & comprehensive database which provides a WIP list of known antique & modern arcade games, casino games & coin-operated machines, including: arcade video games, pinballs, slot machines / pachislots, pachinkos, bat games, bingos, gun games, bowlers / shuffle alleys, jukeboxes, musical instruments, trade stimulators, fortune tellers, strength testers, kiddie rides, redemption games, allwins, working models, vending machines, pool tables, viewers, shockers, scales & more...

Mesen2 Git (2023/10/03)

EmuCR: MesenMesen2 Git (2023/10/03) is compiled. Mesen is a NES/Famicom emulator and NSF player. It is still a work in progress - some features are currently incomplete or may change in future versions.