x360ce v4.20.43.0 is released. Xbox 360 Controller Emulator (a wrapper library that translates the xinput calls to directinput calls) which allows your controller (GamePad, Joystick, Wheel, ...) to function like an Xbox 360 controller on a Windows PC. For example it allows you to play Grand Theft Auto (GTA) game with Logitech wheel.

x360ce Changelog:
Fixed: A controller tab showed a red light while its controller was working, whenever a real controller was plugged in.
Fixed: A controller tab whose XInput place a real controller was holding showed no light, as though the place were empty.
Fixed: A controller tab showed green where a real controller had taken its place, so mappings that reached nothing looked like they were working.
Fixed: Controller tab lights changed their mind for a moment after every start.
Fixed: A real controller holding an XInput place stopped a second controller tab from getting one at all, with a free place sitting unused.
Fixed: Where an emulated controller was put is now watched rather than assumed, so the device lists name the right place.
Fixed: A real controller's XInput place was left blank whenever an emulated controller was also present.
Fixed: An emulated controller taken away went on claiming its XInput place, so two controllers could be shown holding one place.
Fixed: A controller tab showed a green light while its emulated controller was in a different place than the one being read.
Fixed: A controller that could not be created reported a second fault about clearing up after it.
Fixed: The Trigger name did not turn green while a trigger was held down.
Fixed: Putting controllers in order gave each tab another tab's controller, so the order came out right and every tab pointed at the wrong one.
Fixed: A controller switched off while putting them in order was not noticed until something else made the lists read again.
Fixed: The window stopped responding while controllers were being put in order, and said nothing about what it was doing.
Fixed: Repair replaced a newer virtual controller driver with the older one supplied here, saying nothing about it.
Fixed: One virtual controller left behind was counted and listed three times, once for each way of reading it.
Fixed: With a virtual controller from another program on the bus, no XInput place was shown for any controller at all.
Fixed: Letting go of a virtual controller that had already gone was reported as a fault. This was over half of all problem reports received in two days.
Fixed: Force feedback that could not reach a controller the bus had dropped was reported as a fault, instead of being put back quietly on the next pass.
Fixed: A list could close the program while it was being drawn, if a device was removed at that moment.
Fixed: Unpacking the virtual bus driver could fail when the folder it unpacks into did not already exist.
Fixed: A force feedback strength of 0 % ran the motors at full force instead of stopping them.
Fixed: Force feedback strength had no effect on rumble passed on to a real controller.
Fixed: A D-Pad dead zone of 0 % was ignored and used as 100 %.
Removed: Map To on the Direct Input page, which had no effect in this version. Existing configuration files keep the setting untouched.
Changed: Changing the virtual controller driver now asks first and says which version replaces which, and that other programs share it.
Changed: Leftover virtual controllers are now named, with their identifiers, instead of only counted.
Changed: Controller tab lights are flatter and paler, so the colour reads from a distance instead of looking like a dark smudge.
Changed: A controller tab light is drawn in two halves: your device on the left, the emulated controller on the right, so it shows which half is missing.
Changed: The right half of a controller tab light reddens the more that is wrong at once, so the tab most in need of attention stands out.
Changed: A controller tab turns orange when its controller sits in a different XInput place than the tab number, and says which.
Added: Windows 10 and later are supplied virtual controller driver 1.21.442.0, the last one its authors made. Older Windows keeps 1.16.112.0, which is the last that works there.
Added: Options shows the installed virtual controller driver version and the one supplied with this program.
Added: Force Feedback Pass Through sends a game's rumble on to a real controller, which an emulated one cannot feel.
Added: The Force Feedback Test sliders now drive the same path a game uses, including pass through.
Added: The device list now names every XInput place each device reaches, including through the controllers it is mapped to.
Added: XInput Devices can now be put in a different order, not only shown in the one they are in.

Download: x360ce v4.20.43.0
Source: Here