Xpeccy Build 20150122 is released. Xpeccy is an emulator for ZX Spectrum running on the Unix/Linux OS.

Xpeccy Build 20150122 Changelog:
Debugger learned to show the label. Is replaced by the address of the instruction or 2-byte argument, including jr / djnz, because as a result there is still generated address. Switched-on is disabled Alt + L
Added new input arguments. The list below.
-d | --debug: immediately after starting the debugger included.
-p | --profile : enable profile . May occur more than once. Default – or the last used or default (depends on jackdaw configured). It should be noted that when you first turn on profile tied to him ZX reset.
-b | --bank : include in box # C000 page of RAM with the specified number.
-a | --adr : set the address for the download (see. --file)
-f | --file : download binary file to the address that you provide in --adr. If achieved #FFFF, download is interrupted.
--bp : set a trap to fetch address indicated. Breakpoints are not tied to the addresses, and to specific memory cells.
--pc : install PC
--sp : set SP
-l | --labels : load the list of labels. file format – the result of a team LABELSLIST SJASM +. But then, so long as experimental.
Everything else is perceived as an unrecognized file path for the download.
All numbers and addresses are processed strtol, which may have 8-, 10- and 16-hexadecimal number. For 16-ary prefix needed 0x.
Almost all operations are of questionable value to ATM2 / BaseConf, because after resetting the hardware they become the CPM-mode and all four windows memory becoming the last available page ROM.
Just when you change the PC does not run the reset procedure – variables BASIC / TRDOS / etc will not be initialized.

Download: Xpeccy Build 20150122
Source: Here