EmuCR Feeds
Email Us

Dolphin Triforce Git 3.0-694

2012-06-20

EmuCR:DolphinDolphin Triforce Git 3.0-694 is compiled. Dolphin Triforce Git is a branch of Dolphin. Dolphin is the first Gamecube emulator able to run commercial games! Dolphin is a great Gamecube(NGC) and Wii emulator. It has a partial Wii support and plays most Gamecube games. Dolphin has been changed SVN to Git recently.

Dolphin Triforce Git changelog:
* Fixed controls for MKGP2
A: Acceleration
B: Breaks
Analog Stick: Steering

Download: Dolphin Triforce Git 3.0-694 x86
Download: Dolphin Triforce Git 3.0-694 x64
Source: Here

POST by Nichole at 20:33
Tags: , , , ,

17 Comments:

  1. AnonymousJune 20, 2012 at 11:47 PM

    Good job

    ReplyDelete
  2. AnonymousJune 21, 2012 at 12:51 AM

    great work, but i needed to patch the game ini to get it to run mkgp2

    ReplyDelete
  3. AnonymousJune 21, 2012 at 12:53 AM

    hey, anybody can tell me where can i download the MKGP2 game?

    ReplyDelete
  4. KingPepperJune 21, 2012 at 1:26 AM

    Nice one Thank you Anon 4, be interesting to see how it runs on Dolphin.

    ReplyDelete
  5. UnknownJune 21, 2012 at 3:42 AM

    A: Start game/Acceleration
    B: Break
    L: Shot
    Analog Stick: Steering

    Ta rodando blz

    ReplyDelete
  6. AnonymousJune 21, 2012 at 6:38 AM

    thanks to anonymous #4 and #5 for the information =)

    ReplyDelete
  7. matt_KimuraJune 21, 2012 at 11:27 AM

    What's this triforce version, is this better than hashless?

    ReplyDelete
  8. AnonymousJune 21, 2012 at 3:14 PM

    I have tried to run MKGP2 but unfortunately i have got this error message: Unknown DVD command 747650ed - fatal error... any solutions??

    ReplyDelete
  9. AnonymousJune 21, 2012 at 3:59 PM

    [quote]I have tried to run MKGP2 but unfortunately i have got this error message: Unknown DVD command 747650ed - fatal error... any solutions??[/quote]
    same problem here :/

    ReplyDelete
  10. AnonymousJune 21, 2012 at 5:57 PM

    ^Me too :(

    ReplyDelete
  11. AnonymousJune 21, 2012 at 5:57 PM

    Go to dolphin web site, there is a guide to getting it working, I think u need to enable cheats and change port 1 and sp1 to am baseboard or something like that

    ReplyDelete
  12. AnonymousJune 21, 2012 at 6:05 PM

    already try these options , the game run about 30 sec to 1 min and crash with
    this fuc...... dvd error :(

    ReplyDelete
  13. AnonymousJune 21, 2012 at 6:14 PM

    For the people who are getting the dvd error, Open Dolphin right click Mario Kart GP2 banner and open properties, then click on Gecko Codes at the bottom left of the window click on Edit Config and copy and paste this: [Core] Values set here will override the main dolphin settings.
    [Display]
    ProgressiveScan = 0
    [Wii]
    Widescreen = 0
    DisableWiimoteSpeaker = 0
    [Video]
    ProjectionHack = 0
    PH_SZNear = 1
    PH_SZFar = 0
    PH_ExtraParam = 0
    PH_ZNear =
    PH_ZFar =
    [EmuState] The Emulation State. 1 is worst, 5 is best, 0 is not set.
    EmulationStateId = 1
    EmulationIssues = AM-Baseboard
    [OnFrame] Add memory patches to be applied every frame here.
    +$DVDInquiry Patchok
    0x80286388:dword:0x3C602100
    0x8028638C:dword:0x4E800020
    +$Ignore CMD Encryption
    0x80285CD0:dword:0x93A30008
    0x80285CD4:dword:0x93C3000C
    0x80285CD8:dword:0x93E30010
    +$Disable CARD
    0x80073BF4:dword:0x98650023
    0x80073C10:dword:0x98650023
    +$Disable CAM
    0x80073BD8:dword:0x98650025
    +$Seat Loop patch
    0x800BE10C:dword:0x4800002C
    +$Stuck loop patch
    0x8002E100:dword:0x60000000
    +$60times Loop patch
    0x8028B5D4:dword:0x60000000
    +$GameTestMode Patch
    0x8002E340:dword:0x60000000
    0x8002E34C:dword:0x60000000
    +$SeatLoopPatch
    0x80084FC4:dword:0x4800000C
    0x80085000:dword:0x60000000
    [ActionReplay] Add action replay cheats here.
    [Gecko]


    Save and the game will run :)Have fun

    ReplyDelete
  14. AnonymousJune 21, 2012 at 7:36 PM

    Did edit config, and now i have Unknown DVD command 00000a8 - fatal error...crap...

    ReplyDelete
  15. AnonymousJune 21, 2012 at 8:57 PM

    Open dolphin, click config, in general enable cheats must be ticked, in Gamecube SP1 must be AM-Baseboard and Port 1 must be AM-Baseboard this should fix your error, I reproduced your error by not selecting AM-Baseboard so this should let u run the game post back if not. :)

    ReplyDelete
  16. AnonymousJune 22, 2012 at 2:15 AM

    If It's allowed to be mentioned, try searching with google: "Mario Kart Arcade GP1 & 2 download retro roms" (without the quotes). It's the first result shown and on the forum the links are on page 2. F-Zero AX is there as well, but that neither works with quadforce v0.1 FINAL or the triforce build of dolphin emulator.

    If your using quadforce, drag and drop the raw and binary files over DiscEx (rename the first folder before continuing with the next). Then change the GameIDs and GameTitles of "game.iso" in both folders with WiiIsoRenamer. Copy the extracted the folders to sd:/games.

    Download and extract quadforce to sd:/wad and install It using either Multi-Mod Manager or WiiMod (these can be downloaded from ModMii download page 2). A gamecube controller needs to be plugged in at all times or else it will start having a mind of it's own. If your wii console isn't compatible with gamecube backward compatibility, then there isn't an alternative available apart from the above build of Dolphin Emulator which runs MK Arcade GP2 only.

    ReplyDelete
  17. AnonymousJune 22, 2012 at 8:39 AM

    I wont try it until they finally run it. For now, awesome. They are doing a good job! :)

    ReplyDelete

Can't post a comment? Try This!